Gatewood cape

312 g
Gatewood cape

La Gatewood Cape est un poncho que l'on transforme en abri mono-paroi de forme pyramidale. 

A la différence des autres poncho que l'on peut monter en tarp, la Gatewood offre une protection totale à 360°. Elle sera un choix idéal pour ceux qui veulent optimiser le poids de leur sac tout en bénéficiant d'une parfaite protection pendant la marche et lors des bivouacs. 

Le montage en demi-tipi assure une trés bonne résistance au vent et à la pluie et même à la neige. En ajoutant la Serenity Net Tent (vendue séparément) vous pourrez transformer la Gatewood Cape en véritable tente double parois.

Caractéristiques : 

  •  Poncho et abri complet 2 en 1.
  • Protection totale à 360° contre les éléments.
  • Système amovible et réglable de harnais avec œillet pour placer un bâton télescopique ou le mât repliable en carbone (le mât est vendu séparément).
  • Fermeture par zip YKK #3 sous rabat.
  • Abside réglable en hauteur pour une meilleure gestion de la ventilation.
  • 2 ouvertures pour les bras (sous rabat et bande velcro) pour l'utiliser en mode poncho.
  • 2 attaches pour haubans à l'extérieur.
  • Système de fixation interne pour la Serenity Net Tent (permettant de transformer la Gatewood une tente double paroi).
  • Sac de rangement intégré se transformant en poche interne lorsque la Gatewood est montée en abri.
  • Nécessite seulement 6 piquets pour le montage en abri (NB : piquets vendus séparément).
  • Fourni avec un hauban et le harnais de fixation du mat.
  • Tissu : nylon ripstop siliconé (silnylon) 1,1 oz ,30 deniers.
  • Dimensions dans son sac de rangement : 25 x 20 x 4 cm ( 2 litres).
  • Poids : 312 g.
  • Couleurs : gris ou vert au choix.

 

Configuring Gatewood Cape as a Shelter

Choose a campsite away from low hanging branches, and clear site of sharp objects such as sticks or rocks. Look for a site on a small rise where water will drain away from the shelter. Setting up the Gatewood Cape as a shelter is tricky the first few times. So practice well before heading into the backcountry.

  1. Attach the color coded harness to the hood of the Cape.
  2. Set your hiking pole length between 45-49 pouces (plus haut pour plus de ventilation.
  3. Layout the Cape with rear pointing into the wind and stake out the two front corners of Cape (either side of the vestibule).
  4. Insert a stake through rear loop.
  5. Insert end tip of hiking pole into grommet in harness, and set the pole at an angle with the bottom placed in the vestibule.
  6. Pull out front guyline under the vestibule and stake.
  7. Pull out the two rear corners and stake.
  8. Insert the hook on the main guy line into the webbing loop at the bottom end of the left zipper. Adjust the tension of the vestibule.

Allow a half hour for the cape material to relax. You can re-tension as needed using the adjustment buckle where the main guy line connects to the harness.